39 Royalty-Free Audio Tracks for "Too Low"

Use this sound to bring more depth in your production.

The result of too much free time (also low-pass filters and lfo).

The only fail of this pack was made all sounds scream too much since the beginning of the range :(.

This is a sound for videogame. In this sound, i used a low-pass filter instead of notch like the previous sound. That sound haves a slow lfo and reverb too.

Electric guitar, clean with some delay. Short and too the point yet it sounds familiar.

This is a recording of very low frequency hum of a steel mill. The sample has been low pass filtered. The main frequency is about at 25hz. The sound was recorded some distance away of the steel mill area, where it mixed with other sounds as a constant hum, which could be felt in body too at certain spots.

Are there a million of these sounds in film trailers? are there a million of these sounds on freesound? not sure. Started with 100k tone - pitched it down over time - it was too low, so then i pitched the whole file up a bit. Insert to make any slow mo sweeping matrix style scene look even more awesome. . . Or not.

Another sound for videogame. I put some delay too in this version, and same lfo but now with a notch filter again. Second delay is low-passed.

A small collection of synthetic sounds of varying frequencies. Created with amsynth and several ladspa, lv2 filters. Hope you enjoy the sounds. I've tried to reduce the file sizes due to the low bandwidth of the server. I hope the quality doesn't diminish too much. Didn't seem too!anyhoo. . . Enjoy!.

Just some bubbles blowing into water with a rubber tube. Could be used for laboratory foli or boiling water. Some echo, but not too bad if you keep the volume low.

This sound is a low pitched sound, and a very rumbly type of sound too. The laundry machine also gives out a fast pace moving sound, kind of like a rotating drum sound.

Moderate sized city street, ambient with fire truck. Had to take the level way down because it went right by me. Sorry i took it too low for a moment.

An unusual sounding poot with a squishy quality but not too wet sounding. Processed with audacity for a more consistent tone and volume.

Quiet time of day, recorder placed in cardboard box in a cupboard and covered with clothing. As in title and file info, low cut 40hz, 16 bit, 44. 1 khz. I didn't see any point in going below a 70% gain level as it's not too bad at those levels.

Tried to add sub harmonic content to a snare, so a lot of the punch in this 200hz snare comes from harmonics like 50hz 100 hz etc. Execution prolly wasnt too great but i like how it came out.

I recorded the rain in brooklyn and wanted to make a blade runner kinda vibe for sleeping, there's a helicopter in there too, i threw in some low-frequency kinda whale/space ship noises.

I made this using two oscillators in native instrument's fm8 synth. There is nothing too fancy, just two sine waves played out the same output, but one has an offset of 440hz, and the second oscillator has an offset of 330hz. I then just played two notes that didn't sound too dissonant, and then ran it through some low-fi processing.

Automated warning "stall, stall" "too low, terrain" computer voice in cockpit of airplane. Aircraft intercom plugged directly into sony 664 field recorder and recorded at 48kh 16bit. Wav file of the ground proximity warning system automated alert on a dhc-6 twin otter. File converted to. Aif for upload.

Short sample of an overhead fluorescent tube light in my basement with some low white noise. Loops seamlessly. Recorded with a roland edirol r-09hr and edited in audacity. If you use this sample, please tell me what you did with it below! links are nice too.

Oof, here's another audio i made for a roblox project, but never posted. I think i was low on robux or something and i was too lazy to shorten it. I don't know if this would count under the glitch tag, so i'm not gonna add it just yet.

Squeaky audio cable-to-speaker incomplete connection. One end is plugged into a speaker and the other is not plugged into anything. The squeaking sound is made from my fingers touching the tip and sides of the metal tip of the non-connected end of the cable. The variation of sound and pitch is from moving my fingers up and down the metal tip in different speeds, angles, and placements. The sound has been slowed way down, and the pitch has been taken way down too, to create a low drone sound for industrial purposes or in mad chemistry lab scenes, etc. Anything with a dark, industrial, and slight sci-fi feels.

Original description: very low key, down-tuned bass sound with long sustain and release/tail. Sounds good in higher pitches too. Came from two highly tweaked tom and click sounds in flstudio's edison.

This was produced by tapping on a stethoscope which had an earbud pressed against a shure sm57 mic. Low pass filter applied, as well as compression and a gate. Chorus added. Used a recording cassette deck as a preamp going into an m-audio audiophile usb soundcard. Note: if you're having problems listening to this clip, the cutoff frequency of your speaker set may be too high(solution: new speakers). The signal strength exists almost entirely in the very low frequencies, so you may need a sub-woofer to hear it. Otherwise, try turning your speaker volume all the way up. Doing so may saturate the signal and at least allow you to hear the harmonics of the signal caused by the distortion. I don't recommend it, but you'll at least maybe be able to hear something.

A recording made in mid june of 2017 near the ohio river from the bank of rosiclare illinois. The main sound is an angry killdeer that was constantly fussing at me for being too close to her nest. You'll also hear a johnboat plowing through the river, the wind through the leaves of a huge sycamore tree and various children, low in the distance, playing on a playground on this perfect 80 degree summer day. Equipment: marantz pmd661 recorder with the audiotechnica bp4025 stereo microphone, yes, a true stereo recording. Enjoy.

A heartbeat sound i created. Fairly consistent through most of it, and then speeds up into heart-attack mode about 30 seconds from the end. To make it, i took a kick-drum sample and a snare-drum sample, and made a pattern of kick-snare, kick-snare, kick-snare, over and over. I then eq'd them to be less distinct and drum-like, added tape saturation to increase the low-end thumping, a small chorus effect and some compression to get rid of the drums' attack. . . Basically just over-processed the hell out of it. Then i used a plugin called wok m-st to get a fake hard-panned stereo effect. My goal was to make it sound like your heartbeat sounds in your ears when you've been running too fast for too long. I think it sounds cool.

This is a trnsformation of the original sound: http://freesound. Org/people/ricemutt/sounds/23933/ , with the parameters:. For synthesis:window type: blackmanwindow size: 801fft size: 1024minimum f0: 100maximum f0: 2500number of harmonics: 20 (we don't need too many harmonic here)threshold: -100stochastic decimation factor : 0. 1minimum sine duration : 0. 1. For transformation :frequency scaling factors : [0,1,0. 4,1,0. 6,0. 9,1. 0,0. 5,1. 2,0. 3,1. 4,0. 6] <- (make frequency variation steady)frequency stretching factors : [0,2,0. 5,1,0. 51,0. 7] <- (create a frequency variation, high->low )timbrepreservation : 1 <- (no change)time scaling factors : [0, 0, 0. 8, 1. 5,1. 0,2] <- (make some "free fall" feeling).

August, 2nd 2013. About eight and a half minutes worth of summer evening ambience, with crickets and cicadas leading the evening songs. Nothing too eventful, but a nice finish to a great day. Recorded at 48khz, 24 bit. Stereo pair of behringer c-2s (cardioid). The mics have an on-board 3-position switch, with labels "flat," "low-cut," and "-10db. " the switch was set in the -10db position (whoops!). It is unclear if this position also activates the low-cut. Additionally, a 24db/oct low-cut applied in pro-tools at 80hz to clean up a slight wind ruffle. Since it was late at night, and the rest of the family was in bed, i opened my window and placed the microphones (almost) right up against the screen. The a/c unit you can hear is directly below the window. Around the 4:45 mark, the digital thermostat hit a programming mark and kicked the air conditioner back on. Roughly one minute later, i adjusted the thermostat to turn the unit back off. Location: suburbs of atlanta. Free to use whenever and wherever! i'd be interested to hear/see where you use it!.

A recording of a shower door, i used this sound through izotope iris 2 to produce a low, slow bassy kick sound, for a pretty ambient piece i did. I don't know why i became fascinated with the shower door. Bathroom time can be surprisingly pensive, so perhaps the sound of the door shunting shut became associated with that introspective space for me. Yes, i am aware that this the second bathroom sound i have shared. This may take on a certain significance given the fact that i have only shared a handful of recordings, but i encourage you not to read too deeply in to this fact.

Short field recordings made with my iphone in august 2013 while visiting family on one of the many small residential islands located in beaufort, south carolina (of forrest gump, the prince of tides, the big chill, and the great santini fame for any movie buffs out there). The loud buzzing is the ear-piercing mating call of the cicada insect, a sound that's hard to escape in the sultry summer months and semi-tropical environment of the south carolina low country. You can also hear tree frogs and i think maybe some birds too. Unfortunately there's also a little ambient whine of an air conditioner at times and me tip-toeing quietly around on the crunchy gravel dirt road. . . Because i didn't realize my iphone would do such a good job of picking up the sound of my footsteps. :). Feel free to make use of these recordings!if you do use them in some way in a project, i'd be curious to hear from you.

A nearby moo. Taken from a field recording (quite literally) i made of the cows mooing in the field next to our house in pembrokeshire, wales. Recorded tuesday 14 april 2020 (while in lockdown during the coronavirus pandemic) on a zoom q2n. Note, incidentally, that "zoom" spelt backwards is "mooz". Spooky, eh?. I hope that someone out there finds these moos to be just the thing they need. I recorded them for my own music project about ufos, but figured someone else might need a moo or two too! if you use these, please let us know in the comments. It's not compulsory, but it would be fun to find out.

Note: the high-pitched squeaks are artifacts from freesound's preview and aren't present in the actual recording. 10 minutes of a thunderstorm, recorded september 7th, 2019 from my apartment window in seattle. This is the raw recording straight from my zoom h5. Levels were kept low to minimize the chance of clipping. A few thunder sounds were still too loud, but luckily the h5 has a backup function that recorded an identical track 12 db quieter. I've uploaded that as well, so you can splice the two together to taste. Eventually i'll release a processed version with the two combined, plus compression and eq, but i wanted to upload the source material in case you'd prefer to diy it.

So these are all real reactions to certain things i do, i. E, video games, narrations, etc. I myself need genuinely real vocal reactions. I often look for voice clips here on freesound, and there's just some stuff that isn't here. I know i'm not the only one, either, so i post mine as well so others may use them. Interestingly, i've gotten one person who took the time to uh. . . Tell me how they. . . Disapproved of my voice clips, so i just wanted to say that if you wanna use them, do, if not, don't, that's why they are there. I enjoy animating, and others do too, wanting to use others' voice clips. I also had a couple people make techno remixes of a lot of my sounds (thank you by the way, they're awesome). It's not that i care about the. . . Interesting way the one person expressed their opinion, it's just to let some similar acting people know that i post these for a reason. *shrug* but whatever floats your zeppelin, i honestly don't care. Anyway, for those who do use them, thank you. :p.

Some cafe ambience severely altered with blok modular fx. Was originally a long jam cut up into a bunch of individual files but i figured searching through them would be a pain so i merged them back into one file. So listen through and pick the sounds you like with a wav editor, or enjoy it in its own regard as abstract sound sculpture or something. I don't want to divulge too much of what the patch looked like but it random note values with each keyboard press which were then ran through a waveshaper. Later on i add some reverb and use various things to alter the panning for some strange stereo effects. Edit: you might want to use a dc eliminator on the samples because the waveshaper creates some dc offset (basically useless low/zero frequency noise for those not in the know). But maybe it has some aesthetic value for you to keep it intact? you decide. Http://www. Meldaproduction. Com/plugins/product. Php?id=mutility this free vst has a dc eliminator included.

Electro-magnetic interference from the colorino talking color identifier and light probe when held near the internal ferrite antenna on the back right of a 13-year-old boombox near the bottom of the am broadcast band, from 530 to 580 khz. You first hear the device inactive being brought near the radio. This gives a low buzz of stacato clicks. At about 00:23 the light probe button is briefly pushed, you hear a quick boop of the light probe with low light level combined with the beginning of the white noise of the device active. If you put your ear near it after you use it, you will hear a slight hiss from the audio amplifier carrier idling for about a minute after last use. On the am radio this translates to white noise. At 00:26 there is a double click and a distorted voice says black. The voice is being picked up by the am radio. 10 seconds of white noise and i press the color button again and it says black. I put something else over the color sensor and it says a few more things. At 00:51 i hold down the light probe button and try to point it at the light above my desk while still holding it close enough to the radio to pick up the emi signal. You hear a warbling tone at 00:59 as the light reaching the sensor increases and decreases in brightness depending on how it's pointed. The signal fades in and out as the device is moved around. This has all happened at 530 khz. At 01:37 i step the radio up to 580 khz where you get a stronger signal. Wibw from topeka competes with the noise throughout the rest of the file. At 01:51 you hear the distorted error beep as i press the color button without anything but air and light in front of the color sensor. It must be pressed up against the thing you want the color of, or it gets in too much ambient light and errors out with a loud protesting beep.

I'm attempting to create a controllable thunderstorm for a film, and this is my first legitimate attempt. This recording consists of 4 samples of rain, and another 3 samples of rain+thunder that i recorded one afternoon. Equipment used was the inbuilt mics on a roland r-26, and a sennheiser me66 into a sound devices 702. The clips were recorded at 96khz/24-bit, and they were processed at 48khz/24-bit. For processing, i put the samples into kyma, and crossfaded for texture. The howling wind sound is an analog-style low pass filter's frequency, level, and resonance being controlled by a wacom intuos4 pen/tablet. The rain slowly swells, which was done by changing parameters of a granular reverb. The thunder was also controlled by the wacom tablet, with x, y, and z (pressure) dimensions mapped to making the thunder swell in level, density, and texture. This could have been output in surround, but i don't have that many monitors ;). This style of "rain-synthesis" can also go on indefinitely. Please let me know what you think of the quality of this track; eg, if it sounds real, if the wind sounds ridiculous, too much thunder, etc. Use this sound (wherever) if you want to, or let me know if you'd like an mp3 of this, or for it to last longer. I'd like some credit if you do use it, but it's no big deal. A blog is up explaining the method of creation here:http://www. Kylehughesaudio. Com/2/post/2013/02/tempest. Html.

So one of tac0's friends came by with a civilian style contact stun gun and tac0 does what he does best, blasts it a small room for 1/10 of a second. Mp3 48,000 hz at 256 kbps. Also commonly and incorrectly referred to as a "taser" which is on the same level as calling a magazine a "clip". See google for more info. I can't help that it sounds like a bee. Also if it's too short, you'll have to make it longer in your daw. Uses (apart from videos that involve a stun gun or maybe a real taser brand taser): magic lighting zaps? a game show buzzer?. Possible vst modifications. Reverb: sound impulses for speakers. Distortion (guitar style): military style radio noise. Chorus/flange: science sounding things. Pitch: at -30 semitones you get some low pitched sound similar to a airsoft aeg which may be ideal for montage airsoft videos where piles of tokyo marui m4s traditionally muffled by the gopro waterproof case. // at -45 semitones you resemble gun fire at a distance. Mathematically at 10 rps (600 rpm) you could use this as a sit in for a distant fired ak-47 rifle ideal for video games, war movies, mods, etc. Apply a resonant filter and some reverb for appropriate outdoor acoustics. And nobody will know your distant machine gun sound was a civilian stun gun except for us semi colon right parenthesis. Or you could also apply ringmod at ~9000 hz to simulate ear ringing for those ptsd scenes. Trimming + looping + pitch: if you can loop this properly in a daw you could even create a saw style bass for electronic dance music.

This is an updated (improved is debatable) version of my previous electric contact stun gun firing sound, except longer and without peaking. Oh and higher sampling rate so you can hear all the higher frequencies better when you pitch it down. You'll immediately notice it sounds like the boring buzz of a bee. Oh well, not like you'll get a lightning storm. That's about it. Don't forget to have fun. Copy pasta---also commonly and incorrectly referred to as a "taser" which is on the same level as calling a magazine a "clip". See google for more info. I can't help that it sounds like a bee. Also if it's too short, you'll have to make it longer in your daw. Uses (apart from videos that involve a stun gun or maybe a real taser brand taser): magic lighting zaps? a game show buzzer?. Possible vst modifications. Reverb: sound impulses for speakers. Distortion (guitar style): military style radio noise. Chorus/flange: science sounding things. Pitch: at -30 semitones you get some low pitched sound similar to a airsoft aeg which may be ideal for montage airsoft videos where piles of tokyo marui m4s traditionally muffled by the gopro waterproof case. // at -45 semitones you resemble gun fire at a distance. Mathematically at 10 rps (600 rpm) you could use this as a sit in for a distant fired ak-47 rifle ideal for video games, war movies, mods, etc. Apply a resonant filter and some reverb for appropriate outdoor acoustics. And nobody will know your distant machine gun sound was a civilian stun gun except for us semi colon right parenthesis. Or you could also apply ringmod at ~9000 hz to simulate ear ringing for those ptsd scenes. Or some gau-8 avenger. Trimming + looping + pitch: if you can loop this properly in a daw you could even create a saw style bass for electronic dance music.

No pain no gainshort storyby: maqsood hasnitranslated by: najamfree abuzar barqi kutab'khanafeb. 2019owing to the intensity of heat and thirst, the crow was very enervated but there was no water and shade. He went on roaming about in search of water. He was thinking that, he would definitely die, if he could not find water in a short time. He neither wanted to die nor he was disappointed. He was determined to seek water and shady tree till the last breath of his life but, in fact, the intensity of thirst was creating problem for him. Now he had two choices either he must continue seeking water or leave it and wait for death. He mustered courage and flew east in search of water. He had covered a short distance when he saw a garden and hurriedly started flying towards it he wanted to live and was sure of hisexistence in future. Quite surprisingly, he seemed to be more active now. He wanted to reach the garden very soon and every cost. Though he was flying very speedily yet the garden seemed to be very far off. He got tired and thought that the garden be an illusion of his mind. He was shaken about the entity of garden. He thought it might be an illusion and he must seek any other way which could rescue his life. But he had not any other choice. To chase the illusion was better than to leave seeking water because there was the possibility of life. If he died while searching, it would be a courageous step. He stopped for awhile and the garden was quite at short distance. He hopefully started marching towards the garden and felt that it was not too far. He felt grief for wasting a precious moment. He would have been ahead if he had not stopped. He felt ashamed ofhis negative thinking because they could bring about demise. These negative feelings were equal to pessimism. A devoted definitely finds his goal at last because god helps those who helpthemselves. He took on fling with great zeal and now he appeared to be fresh. He was spiritually exalted and was flying without difficulty. Now he reached the threshold of the garden. The garden was in the urban area and it meant that it was for pastime but he was surprised to see that there were no bower. Birds had left this garden when men himself neglected it. He flew over the garden but there was no water. He deplored his labor. Suddenly, he found a pitcher in the garden and felt rejoiced and hurriedly went to it. There was very little water in the pitcher and he made very attempt to drink water but failed due to the low level of water. He hatched a plan and caught a pebble with the help of his beak and put it into the pitcher. Owing to heat, the pebble was dry and it seemed that it had liked it. In a short time, the crow poured another pebble and the first pebble did not like this sharer. Although it had not liked thesecond one yet the bitter fact was that the wise crow imposed his will by throwing more pebbles into the water. The crow was gallantly doing his job and, at last, the pitcher became full of wet pebbles and he drenched his thirst by sucking wetness of them.

Rough clean-up of the sounds :https://freesound. Org/people/yarmonics/sounds/445956/recorded by http://www. Yarmonics. Com/ https://freesound. Org/people/yarmonics/. I deleted parts with handling noise and normalized the sound. For a quick drag and drop in a video editing project and such. It's not perfect and i may have missed some handling noise hence "rough cleanup". But it's a bit better :)if this will be background noise in a video/music, you'll probably lower the volume and the handling noise will become much less apparent. Don't hesitate to eq out the lows too. Fritton lake, norfolk uk. Enjoy.